The relationship among the material of spray room, spray gun and powder loading rate of workpiece - The relationship among the material - Selection of spray room - Large / small cyclone powder room_ Electrostatic spraying equipment_ Zhongshan yanben Coating Technology Co., Ltd Large / small cyclone powder room_ Electrostatic spraying equipment
Hello and welcome toLarge / small cyclone powder room_ Electrostatic spraying equipment_ Zhongshan yanben Coating Technology Co., Ltd
Hotline:0760-88500365


Zhongshan yanben Coating Technology Co., Ltd

Contact person: Mr. Wang

Mobile: 13427001396

Tel: 0760-88500365

Fax: 0760-88500325

Q   Q :2209471440

Email: 2209471440@qq.com

website: www.gdzsyanben.com

Address: Dongrui Industrial Zone, Dongsheng Town, Zhongshan City, Guangdong Province


current location:Home » Selection of spray room » The relationship among the material » The relationship among the material of spray room, spray gun and powder loading rate of workpiece
The relationship among the material of spray room, spray gun and powder loading rate of workpiece
Publisher:handler Date of issue:2017-02-27

Note: on the left side of the figure above is the spray room made of sandwich structure anti conductive engineering plastic, and the 120mm thick insulation has no effect on the electric field of the electrostatic spray gun, so that the ejected charged powder particles are absorbed on the surface of the workpiece under the action of the electric field; on the right side of the figure above is the spray room made of metal conductive materials (such as spray plastic sheet, galvanized sheet, stainless steel sheet), which has no effect on the electrostatic spray The electric field of the spray gun has a great influence, because at this time, the spray room is quite large, and if the large workpiece will also absorb the charged powder particles, so we usually find that there is a thick layer of powder on the inner wall of the metal spray room, and it is not easy to clean.

It can be seen from the above that the spray booth made of sandwich structure engineering plastics will bring the following benefits:

Improve the powder loading rate of the workpiece and save the powder.

It can also protect the electrostatic spray gun, because there is no need to use large powder output and high electric field to make up for the consumption of metal spray room, so a good gun should be equipped with sandwich plastic spray room.

Because the inner wall of the plastic spray room is not easy to stick powder, the time of color changing and cleaning is fast, the production time is increased, and the production capacity is improved. Spraying line in the process of color change is non-stop drying furnace, curing furnace, so the shorter the color change time, the more energy saving, but also reduce the time of workers and other products out of the furnace, also reduce the cost, improve the efficiency!

Copyright: Zhongshan yanben Coating Technology Co., Ltd

Address: Dongrui Industrial Zone, Dongsheng Town, Zhongshan City, Guangdong Province Tel: 0760-88500365

粤ICP备16108589号